Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Manual de usuario descargar pdf (Pagina 34)

34 Rockwell Automation Publication IASIMP-QS028A-EN-P - July 2012

Chapter 2 Create DeviceNet Network Software Files

5. Configure the scanner module’s

parameters on the RSNetWorx tab to

associate the RSLogix 5000 project

with the DeviceNet configuration file

created in Create a DeviceNet

Configuration File on page 29.

a. On the click Browse.

b. Navigate to the DeviceNet

configuration file and click Open.

6. Click OK.

7. Save the RSLogix 5000 project and download it to your Logix5000 controller.

This example uses the name PFlex40_Drive_on_DeviceNet_quick_start.acd

8. Go offline but leave the RSLogix 5000 project open.

IMPORTANT

If you skipped step 1…step 4

because you already created an

RSLogix 5000 project for your

Logix5000 controller, verify that

the project is open and you have

accessed the scanner module’s

RSNetWorx configuration tab.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 53 54

Sin comentarios

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 40 Dr Manual de usuario Pagina 34