
Getting Started
2-1
CHAPTER 2
Getting Started
This chapter provides:
• A description of the EtherNet/IP module’s components
• A list of parts shipped with the module
• A list of user-supplied parts required for installing the module
• An installation checklist
➀
Status Indicators Four LEDs to indicate the status of the
connected drive, module, and network.
➁
MDI Connector A 20-pin, single-row shrouded male
header. An Internal Interface cable
connects to this connector and one on
the drive.
➂
Ethernet Connector An RJ-45 connector the Ethernet cable.
The connector is CAT-5 compliant to
ensure reliable data transfer on either
10Base T or Ethernet connections.
➃
Operating Mode
Switch and Web
Pages Switch
Selects Single or Multi-Drive mode of
operation, and enables or disables the
adapter web pages.
Figure 2.1 – Components of the EtherNet/IP Module
➃
➀
➁
➂
LED’s are on bottom side of module board.
Comentarios a estos manuales