Rockwell-automation 1763 MicroLogix 1100 Programmable Controllers User Manual de usuario descargar pdf (Pagina 40)

Publication 1763-UM001D-EN-P - March 2011

38 Installing Your Controller

Use DIN rail end anchors (Allen-Bradley part number 1492-EA35 or

1492-EAH35) for vibration or shock environments. The following illustration

shows the location of the end anchors.

Panel Mounting

Use the dimensional template shown below to mount the module. The

preferred mounting method is to use two M4 or #8 panhead screws per

module. Mounting screws are required on every module.

TIP

1762 expansion I/O must be mounted horizontally as

illustrated.

TIP

For environments with greater vibration and shock

concerns, use the panel mounting method described below,

instead of DIN rail mounting.

End Anchor

(3.54)

100

(3.94)

40.4

(1.59)

40.4

(1.59)

14.5

(0.57)

MicroLogix

1100

1762 I/O

For more than 2 modules: (number of modules - 1) x 40 mm (1.59 in.)

NOTE: All dimensions are in mm (inches).

Hole spacing tolerance: ±0.4 mm (0.016 in.).

A = 95 mm (3.740 in.)

1763-L16AWA, 1763-L16BWA, 1763-L16BBB

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 255 256

Sin comentarios

Rockwell-automation 1763 MicroLogix 1100 Programmable Controllers User Manual de usuario Pagina 40