Rockwell-automation 20-COMM-I Interbus Adapter Manual de usuario descargar pdf (Pagina 45)

Configuring the Interbus Scanner 4-13

16. Repeat steps #14 and #15 using the 2.0 PCP icon . Enter a

Station name such as “PowerFlex 70 Demo #2”. Note the

Communication Reference (CR) is 3. The CR needs to be known

when using PCP communication services (explicit messaging). Click

OK when complete.

17. When complete, the representation area will look as shown in Figure

4.15.

Figure 4.15 Example PowerFlex 70 Demo #2

18. Right-click on the SST-IBS-SLC icon and select P

arameterization/

Execute. Select “Startup without PDP” as shown in Figure 4.16 and

click OK. This uses the mapping already set up in the scanner and

does not allow re-mapping by the software tool.

20COMM-UM007A-EN-P.book Page 13 Tuesday, January 22, 2002 10:52 AM

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 117 118

Sin comentarios

Rockwell-automation 20-COMM-I Interbus Adapter Manual de usuario Pagina 45