Rockwell-automation 20-COMM-I Interbus Adapter Manual de usuario descargar pdf (Pagina 97)

Adapter Parameters B-3

09 [DPI I/O Active]

I/O that the adapter is actively transmitting. The

value of this parameter will usually be equal to the

value of Parameter 8 - DPI I/O Config.

Default: xxx0 0001

Bit Values: 0 = I/O disabled

1 = I/O enabled

Type: Read Only

Bit Definitions

0 = Cmd/Ref

1 = Datalink A

2 = Datalink B

3 = Datalink C

4 = Datalink D

5 = Not Used

6 = Not Used

7 = Not Used

10 [Flt Cfg Logic]

Sets the Logic Command data that is sent to the

drive if any of the following is true:

•

Parameter 06 - [Comm Flt Action] is set to

Send Flt Cfg and communications are

disrupted.

The bit definitions will depend on the product to

which the adapter is connected.

Default: 0000 0000 0000 0000

Minimum: 0000 0000 0000 0000

Maximum: 1111 1111 1111 1111

Type: Read/Write

Reset Required: No

11 [Flt Cfg Ref]

Sets the Reference data that is sent to the drive if

any of the following is true:

•

Parameter 06 - [Comm Flt Action] is set to

Send Flt Cfg and communications are

disrupted.

Default: 0

Minimum: 0

Maximum: 4294967295

Type: Read/Write

Reset Required: No

Important: If the drive uses a 16-bit

Reference, the most significant word of this

value must be set to zero (0) or a fault will

occur.

[Flt Cfg A1]

[Flt Cfg A2]

[Flt Cfg B1]

[Flt Cfg B2]

[Flt Cfg C1]

[Flt Cfg C2]

[Flt Cfg D1]

[Flt Cfg D2]

Sets the data that is sent to the Datalink in the

drive if any of the following is true:

•

Parameter 06 - [Comm Flt Action] is set to

Send Flt Cfg and the communications are

disrupted.

Default: 0

Minimum: 0

Maximum: 4294967295

Type: Read/Write

Reset Required: No

Important: If the drive uses 16-bit

Datalinks, the most significant word of this

value must be set to zero (0) or a fault will

occur.

20 PIDD W0 Cfg

Configured Process Input Data Description for

Word 0. PCP Object to use for Word 0 transmitted

to Interbus master.

Default: 0x2F9A

(Logic Status)

Setting: See Ta b l e B . 1

Type: Read/Write

Reset Required: No (becomes active

when Interbus network

is restarted)

21 PIDD W0 Actual

Actual Process Input Data Description for Word 0.

Value: See Ta b l e B. 1

Type: Read Only

Parameter

No. Name and Description Details

Bit

Default

10000xxx

01234576

20COMM-UM007A-EN-P.book Page 3 Tuesday, January 22, 2002 10:52 AM

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 117 118

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 20-COMM-I Interbus Adapter Manual de usuario Pagina 97

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 20-COMM-I Interbus Adapter