Rockwell-automation 57C422B 2 Axis Servo Module Manual de usuario descargar pdf (Pagina 64)

4-36

2-Axis Servo Module M/N 57C422B

set by the next occurrence of the gearing registration input,

and the gearing position will be stored in registers 86, 87.

This bit is not set unless the "gearing registration enable" bit

in register 67 is set first. The gearing registration sensed bit

stays high (1) until the "gearing registration enable" bit is

toggled.

The gearing marker sensed

bit is reset by the "reset gearing

position" command in register 66. If the gearing marker pulse

has been selected in register 2, the bit will be set by the next

occurrence of the gearing marker pulse.

The command acknowledge

bit is set by the module to

indicate that a command in either register 66 or 67 was

recognized by the module. When this bit is set, you should

clear the command in register 66 or 67.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 121 122

Sin comentarios

Rockwell-automation 57C422B 2 Axis Servo Module Manual de usuario Pagina 64