Rockwell-automation 57C620 AutoMax Programming Executive Version 3.8 Manual de usuario descargar pdf (Pagina 180)

14Ć6 AutoMax Programming Executive Version 3.x

the rack configuration and the tasks only if they were designated as

reconstructible. If the rack configuration was not designated as

reconstructible, it cannot be recovered. Also, only reconstructible

tasks will be saved back to the personal computer.

Step 1. Start

at the DOS prompt in the root directory

. Use the

DOS

MAKE DIRECTORY command to create a system and

rack

subdirectory, e.g.,

<DRIVE>:<SYSTEM_NAME>\<RACK_NAME>.

Step 2. Access the AutoMax Programming Executive.

Step 3. Go online and then access the Transfer menu.

Step 4. Select Path from the Transfer menu. Change the path to

the system\rack subdirectory you created in step 1.

Step 5. Select Save from the Transfer menu. Use the Save All

option described in 14.4.1 to save the rack configuration

and all the reconstructible tasks to the system\rack

subdirectory you created in step 1.

Step 6. Return to the System Configurator. Use the Remove

command to delete the AutoMax rack you are recovering.

You will reĆcreate the rack in the next step.

Step 7. Use the Import Rack procedure described in section

5.3.9.6 to reĆcreate the rack. When you are prompted for

the source directory path, enter the system\rack path you

created in step 1.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 297 298

Sin comentarios

Rockwell-automation 57C620 AutoMax Programming Executive Version 3.8 Manual de usuario Pagina 180