Rockwell-automation 1746-HSCE2 Multi-Channel High Speed Counter Module Manual de usuario descargar pdf (Pagina 47)

Publication 1746-UM002B-EN-P - August 2004

Installation and Wiring 3-7

Input and Output

Connections

Input and output wiring terminals are shown in the figure below.

Each terminal accepts #14 AWG wire. Tighten screws only tight

enough to immobilize the wire. The torque applied to the screw

should not exceed 0.9 Nm (8 in-lb.).

Figure 3.4 Terminal Wiring

Removing the Terminal Block

Remove the terminal block by turning the slotted terminal block

release screws counterclockwise. The screws are attached to the

terminal block, so it will follow as the screws are turned out.

ATTENTION

To avoid cracking the removable terminal block,

alternate turning the slotted terminal block release

screws.

B1-

A1-

A2-

Z1-

Z2-

B2-

OUTPUT 2

OUTPUT 0

OUTPUT +Vdc

B1+

A1+

A2+

Z1+

Z2+

B2+

OUTPUT 1

OUTPUT COMMON

OUTPUT 3

Release Screw

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 139 140

Sin comentarios

Rockwell-automation 1746-HSCE2 Multi-Channel High Speed Counter Module Manual de usuario Pagina 47