Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Manual de usuario Pagina 9
- Pagina / 120
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Rockwell Automation Publication 1734-UM017B-EN-P - October 2013 1
Chapter
1
Overview of the 1734 POINT and
1738 ArmorPOINT EtherNet/IP Adapters
Overview
This chapter provides an overview of the POINT I/O and ArmorPOINT I/O
Series B Dual Port EtherNet/IP adapters, their primary features, and how to use
them. You need to understand the concepts discussed in this chapter to configure
your adapter and use it in an EtherNet/IP control system.
The following table lists where to find specific information.
Adapter Features
The POINT I/O and ArmorPOINT I/O adapters provide connectivity to
EtherNet/IP networks for POINT I/O and ArmorPOINT I/O modules
respectively.
The POINT I/O adapter is for the I/O backplane that provides connectivity
through two RJ-45 connectors for 2-port pass-through support of daisy chain or
ring, and the existing star and tree network topologies.
Topic Page
Adapter Features 1
What the Adapter Does 2
Physical Features of Your Adapters 3
Types of Modules 4
Hardware/Software Compatibility 4
Important Adapter Considerations 4
Set the Chassis Size 4
Adapter Replacement 5
Empty Slots and RIUP Situations 5
Power Up a System for the First Time 6
Use of the Common Industrial Protocol (CIP) 6
Understand the Producer/Consumer Model 7
Specify the Requested Packet Interval (RPI) 7
Support for Rack-optimized and Direct Connections 7
Mixing Rack-optimized and Direct Connections 8
Chapter Summary 8
- EtherNet/IP Adapters 1
- Important User Information 2
- Who Should Use this 3
- Purpose of this Manual 3
- Common Techniques Used 4
- Table of Contents 5
- Adapter Features 9
- What the Adapter Does 10
- Physical Features of Your 11
- Adapters 11
- software releases 12
- chassis size 12
- Replacement 13
- Use of the Common 14
- Industrial Protocol (CIP) 14
- Chapter Summary 16
- Overview 17
- A = DIN rail 18
- Install POINT I/O Modules 19
- Remove POINT I/O Modules 19
- Remove ArmorPoint I/O Modules 22
- Replace An Adapter 23
- Wire the Adapter 24
- for more information 26
- third party DHCP server 27
- Configuration 28
- Requirements 28
- Gateway Address 29
- Subnet Mask 30
- Network Address 31
- Use the Rockwell BootP/ 32
- DHCP Utility 32
- 1. Run the BootP software 33
- Save the Relation List 35
- Use DHCP Software to 36
- Configure Your Adapter 36
- Set Up the Hardware 38
- Create the Example 39
- Application 39
- Configure the I/O Modules 40
- New Module 41
- Name Local_ENBT 42
- IP Address 10.88.70.4 42
- Add the POINT I/O Adapter 44
- Name POINT IO Adapter 45
- IP Address 10.88.70.2 45
- IMPORTANT 45
- 1734-SG001 48
- The New Module dialog opens 49
- Ethernet 53
- Edit the Controller Tags 54
- Create the Ladder Program 55
- Download the Program to 55
- Verify the Module Chassis 56
- 3. Select Properties 57
- 4. Click the Connection tab 57
- Configure the Adapter with 59
- Fixed IP Address 59
- Recover From an 60
- Overloaded Adapter 60
- Software 61
- Connection 72
- 72
- 10. Click OK 77
- Verify the Module 79
- Chassis Size 79
- 8. Click OK to continue 80
- Access Module Data 82
- Troubleshoot the Adapter 83
- 1738-AENTR 86
- Series B 86
- Specifications 89
- Power Supply 91
- EtherNet Communication 91
- Environmental 92
- Adapter Web Dialogs 93
- Work with the Diagnostics 95
- Download EDS files for 96
- Use the Network Settings Page 97
- Use the I/O Connections Page 100
- Work with the 102
- Configuration Pages 102
- Use the Identity Page 104
- Use the Services Page 106
- Work with the Browse 107
- Chassis Page 107
- If there is no response to 108
- Communication Driver 109
- Configure the AB_ETH/IP 112
- Rockwell Automation Support 120
- Documentation Feedback 120
Relacionado con productos y manuales para Equipo Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O
Equipo Rockwell-automation 1769-OA8 Compact 100 to 240V ac Solid State Output Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1734-PDN/B Point I/O DeviceNet Communication Inter Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1786-RPFRXL ControlNet Fiber Ring Modules Installa Manual de usuario
(40 paginas)
(40 paginas)
Equipo Rockwell-automation 1732E-XXXX ArmorBlock 2-Port EtherNet/IP Modules w Manual de usuario
(24 paginas)
(24 paginas)
Equipo Rockwell-automation 1746-Px SLC 500 Power Supplies Installation Instru Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1771-OFE/B Analog Output Module User Manual Manual de usuario
(84 paginas)
(84 paginas)
Equipo Rockwell-automation 1738-8CFGM23 ArmorPoint Module with Configurable 2 Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1769-OA16 Compact 16-Point 100 to 240V ac Output M Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1792D-8BVT8D ArmorBlock MaXum 8 Input/8 Output Mod Manual de usuario
(16 paginas)
(16 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.092 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales