Rockwell-automation 198 Series C Modular DeviceNet Starter Auxiliary U Manual de usuario Pagina 23

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 176
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 22
Operation 3-2
Publication 198-UM002A-EN-P December 2001
Accepting the configuration of the I/O modules is a part of the device configuration process
outlined below.
To begin the configuration of DeviceNet, execute the RSNetworx software and complete the
following procedure.
1. From the 1HWZRUN menu, choose 2QOLQH. After “online” has been selected you will
see the following screen:
2. Choose the appropriate DeviceNet/PC interface and click OK. RSNetWorx will tell
the user to upload or download devices before viewing configuration.
3. Select the 2. button. RSNetWorx will now browse the network and display all of the
nodes it has detected on the network.
RSNetWorx will display an icon and the name and node address of each device on the
network. The figure below shows the RSNetWorx window after browsing the network.
If the name of the device shows up as “Unrecognized Device” it means that the device is not
registered. (see Advanced Topics on page 3-12).
Vista de pagina 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 175 176

Comentarios a estos manuales

Sin comentarios