Rockwell-automation 198 Series C Modular DeviceNet Starter Auxiliary U Manual de usuario descargar pdf (Pagina 34)

3-13 Operation

Publication 198-UM002A-EN-P December 2001

➊ Revision 4.xxx and higher includes DeviceLogix. Be sure that the last three digits of the EDS file name are at

least “400” or the EDS file will not work with a Series C MDSA.

➋ These are the catalog numbers for distributed motor starters. These three catalog numbers reported by a

198-DNG module when the “Motor Starter Type” attribute in the DeviceNet Interface object is set to a value

of 1, 2 or 3. This results in the MDSA reporting a Device Type of 22 (Motor Starter). For a complete description

of Motor Starter Type operation, refer to Appendix B

After obtaining the needed EDS file(s), do the following:

1. From the 7RRO V menu, choose ('6:L]DUG. The following screen appears:

Table 3.1 Series C MDSA EDS files

Vendor

Code

Device

Type

Product

Code

Revision ➊ Cat. No. EDS file

1 12 67 4.xxx 198-DN 0001000C00430400.eds ➊

1 12 98 4.xxx 198-DNG 0001000C00620400.eds ➊

1 22 1 4.xxx 190D➋ 0001001600010400.eds ➊

1 22 2 4.xxx 191D➋ 0001001600020400.eds ➊

1 22 3 4.xxx 160D➋ 0001001600030400.eds ➊

IMPORTANT

The EDS files listed in the table above can be obtained via the internet

at: http://www.ab.com/networks/eds. Make sure that the EDS file

revision number matches the revision code printed on the MDSA

module.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 175 176

Sin comentarios

Rockwell-automation 198 Series C Modular DeviceNet Starter Auxiliary U Manual de usuario Pagina 34