Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Manual de usuario descargar pdf (Pagina 48)

48 Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013

Chapter 4 Configuring the I/O

4. Expand the Communications group to display all of the available

communication modules.

5. In the list, select the EtherNet/IP bridge used by your controller.

In this example, we use a 1756-ENBT EtherNet/IP Bridge (Series A), so

the 1756-ENBT/A option is selected.

6. Click OK.

7. In the Select Major Revision pop-up dialog box, select the major revision

of its firmware.

8. Click OK.

The bridge’s New Module dialog box appears.

9. Edit the following:

Box Setting

Name A name to identify the bridge.

Description Optional – description of the bridge.

Revision

Electronic Keying

Click Change to change Revision or Electronic Keying.

The minor revision of the firmware in the bridge. (You already set the major revision by

selecting the bridge series in step 7.)

Compatible Keying. The ‘Compatible Keying’ setting for Electronic Keying verifies

that the physical module is consistent with the software configuration before the

controller and bridge make a connection. Therefore, be sure that you have set the

correct revision in this dialog box. See the online Help for additional information on

this and other Electronic Keying settings. If keying is not required, select ‘Disable

Keying’. Disable keying is recommended.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 189 190

Sin comentarios

Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Manual de usuario Pagina 48