Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Manual de usuario descargar pdf (Pagina 31)

Publication 1753-PM001A-EN-P - November 2005

Connect to the GuardPLC Controller 1-21

Determine the IP Address

and SRS of the Controller

The default IP address of a new controller is 192.168.0.99. The default

SRS of a new controller is 60000. To check the current IP address and

SRS of a controller:

1. Choose Online>Communication Settings.

2. In the MAC address field, enter the MAC address of the

controller.

The MAC address is on the sticker on the side of a GuardPLC

1200 controller, on the label positioned over both lower RJ-45

connections on GuardPLC 1600/1800 controllers and I/O, or on

the front bezel of the AB-CPU module of a GuardPLC 2000

controller.

3. Click Get.

The controller responds back with the IP address and the SRS it

is currently using.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 121 122

Sin comentarios

Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Manual de usuario Pagina 31