Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Manual de usuario descargar pdf (Pagina 36)

Publication 1753-PM001A-EN-P - November 2005

2-2 Connect to GuardPLC Distributed I/O Modules

Distributed I/O modules inherit the first portion of the SRS from the

parent controller. You configure the second part of the SRS. For

example, the default SRS of distributed I/O modules is 60000.1. If the

module is owned by a controller with an address of 25, then the SRS

of the distributed I/O should be 25.1. If a second module is added to

the controller, its SRS is then 25.2. A third module would be SRS 25.3.

IP Address

Like any Ethernet device, the distributed I/O module requires a

unique IP address.

Add the Module

to the

Hardware Configuration

To add a distributed I/O module to your GuardPLC project’s hardware

configuration:

1. In the Hardware Management window of RSLogix Guard PLUS!,

right-click the Distributed I/O folder under your controller

Resource.

2. Choose New and the desired I/O module.

The Specify HH Network dialog appears. Because the controller

and the distributed I/O modules communicate via GuardPLC

Ethernet, you must specify a GuardPLC Ethernet network.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 121 122

Sin comentarios

Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Manual de usuario Pagina 36