Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Manual de usuario descargar pdf (Pagina 56)

Publication 1753-PM001A-EN-P - November 2005

3-16 Create a GuardPLC Project

7. Connect the blocks with lines by left-clicking and holding the

very small dots on the edges of the boxes. Drag and release over

the destination dot.

8. Create a duplicate MOTOR signal by right-clicking MOTOR and

choosing Duplicate. Drag and drop the signal on the page.

9. Invert the STOP signal by right-clicking on the dot and choosing

Invert.

Save, Compile, Test, and

Download the Program

Save the Program

1. Left-click the Save button to save your program edits.

A window appears, which you can use to document your

changes.

TIP

Use the Zoom In tool on the toolbar to

zoom in to see the dots on the edge of the

boxes.

TIP

In addition to standard function blocks, you can

create user-defined function blocks that consist of

standard function block logic, as described in

Chapter 8. You can also purchase

application-specific safety function blocks that have

been certified by TÜV. Go to www.ab.com/guardplc

or contact your local Rockwell Automation

representative for more information.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 121 122

Sin comentarios

Rockwell-automation 1753-PCS-PAR Using RSLogix Guard PLUS! with GuardP Manual de usuario Pagina 56