Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Manual de usuario descargar pdf (Pagina 338)

Publication 1760-UM002B-EN-P - March 2005

7-10 Pico GFX-70 Settings

3. Select the required function block using the up/down arrow keys.

4. Press the OK button.

5. Scroll through the constants of the function block inputs.

6. Change the values for a parameter set:

– With OK in the Entry mode.

– Left/right arrows to change decimal place

– Up/down arrows to change the value of a decimal place

–OK save constants or

–ESC retain previous setting.

7. Press ESC to leave the parameter display.

Adjustable Parameters for Function Blocks

You can modify the function blocks used in the circuit diagram in three

different ways:

• All circuit diagram parameters can be adjusted in STOP mode via the

function block editor.

• Set point (constants) can be modified in RUN mode via the function

block editor.

• Set points (constants) can be modified via the PARAMETERS menu.

Adjustable set point values are:

• The inputs with all function blocks if constants have been used.

• Switch on and off times with time switches.

In RUN mode Pico GFX-70 operates with a new set point as soon as it has

been modified in the parameter display and saved with OK.

T 03 S +

>I1 020.030

>I3 005.000

QV> 012.050

IMPORTANT

Only constants on the function block inputs can be

changed.

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 399 400

Comentarios a estos manuales

Sin comentarios