Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Manual de usuario descargar pdf (Pagina 343)

Publication 1760-UM002B-EN-P - March 2005

Pico GFX-70 Settings 7-15

Activating and Deactivating

the P Buttons

Even though the cursor buttons (P buttons) have been set as push button

actuator inputs in the circuit diagram, this function is not activated

automatically. This prevents any unauthorized use of the cursor buttons. The P

buttons can be activated in the System menu.

The P buttons are activated and deactivated via the P BUTTONS menu.

1. Press DEL and ALT to call up the System menu.

2. Select the SYSTEM menu.

3. Move to the cursor to the P BUTTONS menu.

Activating the P Buttons

If Pico GFX-70 is displaying P BUTTONS ✓, this means that the P buttons are

active.

1. Otherwise select P BUTTONS and press OK.

Pico GFX-70 changes the display to

P BUTTONS ✓ and the P buttons

are activated.

2. Press ESC to return to the Status display.

The P buttons are only active in the Status display. In this display you

can use the P buttons to activate inputs in your circuit diagram.

IMPORTANT

How Pico GFX-70 input and output signals are processed

internally is explained in Delay Times for Inputs and Outputs on

page 8-5.

IMPORTANT

If Pico GFX-70 is password-protected you cannot open the

System menu until you have “unlocked” it.

DEBOUNCE ✓ ▲

P BUTTONS

RUN MODE

CARD MODE ▼

DEBOUNCE ✓ ▲

P BUTTONS

RUN MODE

CARD MODE ▼

DEBOUNCE ✓ ▲

P BUTTONS ✓

RUN MODE

CARD MODE ▼

1 2 ... 338 339 340 341 342 343 344 345 346 347 348 ... 399 400

Comentarios a estos manuales

Sin comentarios