Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Manual de usuario descargar pdf (Pagina 83)

Publication 1760-UM002B-EN-P - March 2005

Commissioning 3-5

Starting Point Status Display

When you switch on Pico GFX-70, it opens the Status display immediately to

show the switching state of the inputs and outputs. It also indicates whether

the processor is already running a program. Note: If another display is visible,

a visualization screen is shown.

In this case Pico GFX-70 must be in STOP mode.

1. Press OK to switch to the main menu.

2. Press OK to switch to the next menu level, and press ESC to move one

level back.

3. Press OK twice to enter the circuit diagram display via menu items

PROGRAM… −−> PROGRAM. This is where you will create the circuit

diagram.

I ............

IP-

MO 02:00

Q........ STOP

TIP

The examples were written without the use of

expansion units. If an expansion unit is connected,

the Status display will first show the status of the

basic unit and then the status of the expansion unit

before showing the first selection menu.

PROGRAM...

STOP

✓ RUN

PARAMETERS

SET CLOCK...

TIP

OK has two other functions:

• Press OK to save modified settings.

• In the circuit diagram, you can also press OK to

insert and modify contacts and relay coils.

CIRCUIT DIAGRAM

FUNCTION RELAYS

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 399 400

Comentarios a estos manuales

Sin comentarios