Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Manual de usuario descargar pdf (Pagina 344)

Publication 1760-UM002B-EN-P - March 2005

7-16 Pico GFX-70 Settings

Deactivating the P Buttons

1. Select P BUTTONS ✓.

2. Press OK.

Pico GFX-70 changes the display to

P BUTTONS and the P buttons are

deactivated.

Startup Behavior

The startup behavior is an important aid during the commissioning phase. The

circuit diagram which Pico GFX-70 contains is not as yet fully wired up or the

system or machine is in a state which Pico GFX-70 is not permitted to control.

The outputs should not be controlled when Pico GFX-70 is switched on.

Setting the Startup Behavior

Requirement: Pico GFX-70 must contain a valid circuit diagram.

1. Switch to the System menu.

2. Specify the operating mode which Pico GFX-70 must use when the

supply voltage is applied.

IMPORTANT

The P buttons are automatically deactivated when loading a

circuit diagram from the memory module or via PicoSoft

Pro to Pico GFX-70, or when deleting a circuit diagram in

Pico GFX-70.

IMPORTANT

The GFX models without a display can only be started in

RUN mode.

IMPORTANT

If Pico GFX-70 is protected by a password, the

System menu will not be available until Pico GFX-70

is “unlocked” (see Unlocking Pico GFX-70 on page

7-5).

1 2 ... 339 340 341 342 343 344 345 346 347 348 349 ... 399 400

Comentarios a estos manuales

Sin comentarios