Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Manual de usuario Pagina 21
- Pagina / 204
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Getting Started 1-9
This section is provided to help experienced users quickly start using the
1769-SM2 Compact I/O to DSI module. If you are unsure how to
complete a step, refer to the referenced chapter.
Quick Start
Step Action Refer to…
1 Review the safety precautions for the module. Throughout This Manual
2 Verify that the drive is properly installed. Drive User Manual
3 Install the module.
Verify that the controller is not powered. Connect the
module to the controller backplane bus. Then connect
the module to the drive(s) using communications cable
22-RJ45CBL-C20 or AK-U0-RJ45-TB2P terminal block
connectors and communications network wiring.
Chapter
2,
Installing the Module
4 Apply power to the module.
The module receives power from the controller. Apply
power to the controller. The MODULE indicator should
be green or flashing green. If it flashes red, there is a
problem. Refer to Chapter
9, Troubleshooting.
5 Configure the module for your application.
Set the following parameters for the module as required
by your application:
• I/O configuration.
• Fault actions.
Chapter
3,
Configuring the Module
6 Apply power to the drive. Drive User Manual
7 Configure the controller to communicate with the
module.
Depending on the type of
controller and 1769-SM2
operating mode:
• Chapter
6,
MicroLogix 1500
Example Ladder
Programs
• Chapter 7,
CompactLogix
Example Ladder
Programs
• Chapter 8,
ControlLogix w/
1769-ADN DeviceNet
Example Ladder
Program
8 Create a ladder logic program.
Use a programming tool such as RSLogix to create a
ladder logic program that enables you to:
• Control the module and connected drive.
• Monitor or configure the drive using Explicit
Messages.
- PowerFlex 1769-SM2 1
- Compact I/O DSI/Modbus 1
- Communications Module 1
- Important User Information 2
- Summary of Changes 3
- Table of Contents 5
- About This Manual 9
- Rockwell Automation Support 10
- P-4 About This Manual 12
- Getting Started 13
- Features 14
- Powerflex 4-Class Drives 15
- 1769-SM2 15
- Getting Started 1-5 17
- HVAC adapters 17
- Compatible Products 18
- Required Equipment 18
- Safety Precautions 19
- Quick Start 21
- Status Indicators 22
- Installing the Module 23
- Removing Power 24
- Mounting the Module 28
- Installing the Module 2-7 29
- ±0.4 mm (0.016 in.) 29
- DIN Rail Mounting 30
- Single Mode 32
- Grounding the Module 34
- To Drive 1 To Drive 2 35
- Network Cable Strain Relief 36
- Applying Power 36
- 2-16 Installing the Module 38
- Configuring the Module 39
- Configuration Tools 40
- Configuration Methods 41
- Controller Mode 41
- Before v6.30 42
- Parameter Mode 50
- DIAG PA R AM DSEL MEM SEL 51
- DIAG PARAM DSEL MEM SEL 51
- VALUE LIMITS SEL 51
- Changing the Idle Action 53
- Setting the RTU Baud Rate 55
- Selecting the RTU Format 55
- Setting the RTU Rx Delay Time 56
- Setting the RTU Tx Delay Time 56
- Resetting the Module 58
- Configuring the Module 3-21 59
- Flash Updating the Module 60
- Understanding the I/O Image 61
- Module Control Word 62
- Module Status Word 63
- Using Logic Command/Status 64
- Using Reference/Feedback 64
- Chapter 5 65
- Formatting Explicit Messages 66
- PowerFlex 4/40 Drives 82
- MicroLogix 1500 Controller 82
- CompactLogix Example Ladder 103
- Programs 103
- PowerFlex 40 Settings 104
- 1769-SM2 Settings 104
- CompactLogix Example Program 106
- Read Message (Rung 14) 109
- Write Message (Rung 17) 110
- Multi-Drive Mode 112
- PowerFlex 70 Setting 113
- 20-COMM-H Settings 114
- CH1 Drive 0: 123
- Modbus RTU operation 124
- Example Ladder Program 131
- Using RSLinx Classic 132
- Using RSNetWorx for DeviceNet 133
- Setting Up the 1769-ADN 134
- Example Program Data Table 151
- Troubleshooting 153
- MODULE Status Indicator 154
- CH1…CH3 Status Indicators 155
- Troubleshooting 9-5 157
- Viewing and Clearing Events 158
- Troubleshooting 9-7 159
- 9-8 Troubleshooting 160
- Specifications 161
- Environmental 162
- Regulatory Compliance 162
- DSI Cable Requirements 162
- Module Parameters 163
- B-2 Module Parameters 164
- Module Parameters B-3 165
- B-4 Module Parameters 166
- Module Parameters B-5 167
- B-6 Module Parameters 168
- Module Parameters B-7 169
- B-8 Module Parameters 170
- CIP/DSI Objects 171
- Supported Data Types 172
- CIP Identity Object 173
- CIP Parameter Object 174
- Instance Attributes 175
- (Continued) 175
- Services 176
- DSI Device Object 177
- DSI Device Object (Continued) 178
- DSI Parameter Object 180
- Descriptor Attributes 182
- CIP/DSI Objects C-13 183
- DSI Fault Object 184
- DSI Fault Object (Continued) 185
- DSI Diagnostic Object 186
- C-18 CIP/DSI Objects 188
- Command/Status Words 189
- Logic Status Word 190
- Glossary 191
- F Flash Update 192
- I Idle Action 193
- L Logic Command/Logic Status 193
- N NVS (Non-Volatile Storage) 193
- O Objects 193
- R Reference/Feedback 194
- S Scanner 195
- Z Zero Data 195
- Glossary-6 196
Relacionado con productos y manuales para Equipo Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu
Equipo Rockwell-automation 1794-AENTR_AENTRXT FLEX I/O Dual Port EtherNet/IP Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 1764-28BXB MICROLOGIX 1500 PROG. CONTROLLER BASE U Manual de usuario
(115 paginas)
(115 paginas)
Equipo Rockwell-automation 1792D-8BT8PE ArmorBlock MaXum 8 In/8 Out Module wi Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1785-Lx0E Ethernet PLC-5 Programmable Controllers Manual de usuario
(28 paginas)
(28 paginas)
Equipo Rockwell-automation 1771-IXHR , D17716.5.80 HIGH RESOL.THERMOCOUPLE Manual de usuario
(60 paginas)
(60 paginas)
Equipo Rockwell-automation 1751 SynchLink 4-Port Splitter Block Installation Manual de usuario
(16 paginas)
(16 paginas)
Equipo Rockwell-automation 1757-SWKIT400 ProcessLogix R400.0 Server Installat Manual de usuario
(12 paginas)
(12 paginas)
Equipo Rockwell-automation 1769-IF4XOF2 Compact 8-Bit Low Resolution Analog I Manual de usuario
(104 paginas)
(104 paginas)
Equipo Rockwell-automation 1784-PM02AE-TP0 2 Axis Servo Card Termination Pane Manual de usuario
(8 paginas)
(8 paginas)
Equipo Rockwell-automation 1794-ID2/B INSTALL INSTR 24v FLEX I/O 2 CHANNEL In Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1753-IF8XOF4 GuardPLC 1753-IF8XOF4 Analog I/O Modu Manual de usuario
(20 paginas)
(20 paginas)
Equipo Rockwell-automation 1758-RTU202 DataSite Software User Manual FRN 1.2 Manual de usuario
(348 paginas)
(348 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales