Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Manual de usuario descargar pdf (Pagina 30)

2-8 Installing the Module

Figure 2.5 1769-SM2 Module with Remote 1769-Based Adapter

Panel Mounting Procedure Using Module as a Template

The following procedure enables you to use the assembled modules as a

template for drilling holes in the panel. Due to module mounting hole

tolerance, it is important to follow these steps:

1. On a clean work surface, assemble no more than three modules.

2. Using the assembled modules as a template, carefully mark the

center of all module-mounting holes on the panel.

3. Return the assembled modules to the clean work surface, including

any previously mounted modules.

4. Drill and tap the mounting holes for the recommended M4 or #8

screw (not included).

5. Place the modules back on the panel, and check for proper hole

alignment.

6. Attach the modules to the panel using the mounting screws.

DIN Rail Mounting

The 1769-SM2 module can be mounted using these DIN rails:

• 35 x 7.5 mm (EN 50 022 - 35 x 7.5)

• 35 x 15 mm (EN 50 022 - 35 x 15)

When mounting the module to a DIN rail, make sure that the latches are

closed and properly securing the module.

I / S

port

MODULE

CH1

CH2

CH3

132 mm (5.19 in)

122.6 mm (4.83 in)

118 mm (4.65 in)

147.4 mm (5.81 in)

14.7 mm

(0.58 in)

35 mm

(1.38 in)

35 mm

(1.38 in)

28.5 mm

(1.12 in)

35 mm

(1.38 in)

70 mm

(2.76 in)

35 mm

(1.38 in)

35 mm

(1.38 in)

35 mm

(1.38 in)

50 mm

(1.97 in)

40 mm

(1.58 in)

59 mm

(2.32 in)

59 mm

(2.32 in)

Mounting Hole

Dimension

DIN Rail

Center Line

DIAG

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 203 204

Comentarios a estos manuales

Sin comentarios

Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu