Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Manual de usuario descargar pdf (Pagina 81)

Chapter 6

MicroLogix 1500 Example Ladder

Programs

This chapter provides ladder examples for a MicroLogix 1500 controller

used with a 1769-SM2 module in Single mode and Multi-Drive mode.

The ladder example provided in this section is based on a 1769-SM2

module in slot 1 with one PowerFlex 4/40 drive connected to each

channel (Figure 6.1). The ladder example demonstrates the following

functionality for each channel:

• Send a Logic Command to control the drive (for example, start, stop).

• Send a Reference to the drive and receive Feedback from the drive.

• Receive Logic Status information from the drive.

• Write and read parameters.

Explicit messaging (parameter read/write) capability varies between the

RSLogix software packages and controllers:

• Versions of RSLogix 500 before v6.30 do NOT support creating a

Message instruction for the 1769-SM2 module. This limits the

MicroLogix 1500 to performing I/O messaging (Logic Command/

Reference, and Logic Status/Feedback) only.

• RSLogix 500 v6.30 (or higher) must be used with a MicroLogix

1500 LRP Series C (or newer) controller to create Message

instructions to send explicit messages to the 1769-SM2 module.

Topic Page

Single Mode

6-1

Multi-Drive Mode 6-8

Single Mode

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 203 204

Sin comentarios

Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Manual de usuario Pagina 81