Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Manual de usuario descargar pdf (Pagina 36)

2-14 Installing the Module

Some type of strain relief should be provided for the communication

cables within 12 inches (305 mm) of the 1769-SM2 module. This may

include wireways, cable ties, panel mounted strain reliefs, or some other

appropriate strain relief device.

1. Apply power to the controller. The status indicators can be viewed on

the front of the 1769-SM2 module after power has been applied.

2. Apply power to the drive(s). When you apply power to the

1769-SM2 module, controller, and drives for the first time, the status

indicators should be green after an initialization. If the status

indicators go red, there is a problem. Refer to Chapter 9

Troubleshooting.

Network Cable Strain Relief

Applying Power

ATTENTION: Risk of equipment damage, injury, or death exists.

Unpredictable operation may occur if you fail to verify that parameter

settings are compatible with your application. Verify that settings are

compatible with your application before applying power to the drive.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 203 204

Sin comentarios

Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Manual de usuario Pagina 36