Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Manual de usuario descargar pdf (Pagina 58)

3-20 Configuring the Module

Changes to switch settings and some module parameters require that you

reset the 1769-SM2 module before the new settings take effect. You can

reset the module by cycling power to the module or by using Parameter

03 - [Reset Module].

Set Parameter 03 - [Reset Module] to “1” (Reset Module):

Figure 3.22 Example Reset Module HIM Screen

When you enter “1” (Reset Module), the module will be immediately

reset. When you enter “2” (Set Defaults), the module will set all module

parameters to their factory-default settings. After performing a Set

Defaults, enter “1” (Reset Module) so that the new values take effect.

The value of this parameter will be restored to “0” (Ready) after the

module is reset.

Resetting the Module

ATTENTION: Risk of injury or equipment damage exists. If the

module is transmitting control I/O to the drive, the drive may fault when

you reset the module. Determine how your drive will respond before

resetting a connected module.

Value Description

0 Ready (Default)

1 Reset Module

2 Set Defaults

Reset Module

Parameter: #

003

Ready 0

VALUE LIMITS SEL 

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 203 204

Sin comentarios

Rockwell-automation 1769-SM2 Compact I/O DSI/Modbus Communication Modu Manual de usuario Pagina 58