Rockwell-automation 6000 PowerFlex Medium Voltage Variable Frequency D Manual de usuario descargar pdf (Pagina 67)

Rockwell Automation Publication 6000-IN006A-EN-P - April 2014 67

Appendix A

Pre-Commissioning

Responsibilities

Rockwell Automation manages the start-up service for each installed drive at the

customer’s site, but there are a number of tasks the customer or its representatives

must complete before scheduling Rockwell Automation personnel for drive

commissioning.

Review this information prior to commissioning the drive as a reference for drive

line-up commissioning. Record the information in the data sheets provided;

these are useful during future maintenance and troubleshooting exercises.

Inspection and Verification

Before the drive commissioning occurs, Rockwell Automation recommends that

the customer arranges a pre-installation meeting to review:

a. the start-up plan

b. the start-up schedule

c. the drive(s) installation requirements

d. the pre-commissioning checklist

Customer personnel must be on-site to participate in the system start-up

procedures.

See Safety and Codes

on page 41.

ATTENTION: Perform the pre-commissioning tasks in the order listed in this

chapter. Failure to do so may result in equipment failure or personal injury.

IMPORTANT

Rockwell Automation requests a minimum of four weeks’ notice to schedule

each start-up.

ATTENTION: The CMOS devices used on the control circuit boards are

susceptible to damage or destruction by static charges. Personnel working near

static sensitive devices must be appropriately grounded.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 97 98

Sin comentarios

Rockwell-automation 6000 PowerFlex Medium Voltage Variable Frequency D Manual de usuario Pagina 67