
Publication GMLC-5.2 - November 1999
86 Configuring Axis Use
Control Output Limit
Type the maximum number of volts that is output to the drive, from: 0 to
10.
Defining Motor/Drive
The Defining Motor/Drive page configures a physical axis to interface
with both a motor and a servo drive (or amplifier) operating in either
velocity (tach) or torque (current) mode. This page applies only to IMC S
Class 1394/1394 Turbo and IMC S Class 1394L controllers.
To configure the Motor/Drive page, make entries in the following fields:
Drive Type
Select the drive type that matches the type of system you are using:
Comentarios a estos manuales