Rockwell-automation GMLC Reference Manual Manual de usuario descargar pdf (Pagina 671)

100

101

Publication GMLC-5.2 - November 1999

634 System Functions

You define and select Flex I/O output groups using the Tag Explorer

(under Flex I/O Output Group) and Tag Window. It is not necessary to use

this function to specify them directly.

Syntax:

Flex_IO_group_output[module, address, total signals in group,

optional mask]

Flex I/O Module Type

Use the Flex_IO_module_type function to directly determine the module

type of a particular Flex IO module. This function is available only if your

motion controller is running i

CODE

version 3.0 or later (as selected in the

Control Options definition). This function provides a read-only return

value. You cannot use this value to configure or assign Flex IO modules.

You configure Flex I/O modules in the Configure Flex I/O Module Use

dialog box (after first enabling a module in the Flex I/O page of the

Configure Control Options dialog box). It is not necessary to use this

function to use Flex IO modules.

Syntax:

Flex_IO_module_type[module number]

Argument Description

Module Select the Flex I/O module number (from 0 to 7) from which output is sent.

Address Select the address of the selected module’s specific output (from 0 to 15) to

be sent.

Total # of

Signals in the

Group

The total number of consecutive signals (from 1 to 16) comprising the

group, including any masked (or omitted) signals.

Optional Bit

Mask

An integer representing the sum of the binary value of each group output

bit whose signal is sent, excluding—or masking—the binary value of every

group output bit whose signal is not sent. (See

Optional Mask

in the

Group

Input

section.)

1 2 ... 666 667 668 669 670 671 672 673 674 675 676 ... 957 958

Comentarios a estos manuales

Sin comentarios

Rockwell-automation GMLC Reference Manual Manual de usuario Pagina 671

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Rockwell-automation GMLC Reference Manual