Rockwell-automation LDAT Integrated Linear Thrusters Manual de usuario descargar pdf (Pagina 10)

10 LDAT-Series Integrated Linear Thrusters

Rockwell Automation Publication LDAT-IN001A-EN-P - August 2012

Planning Your Installation

Refer to the Kinetix Linear Motion Specifications GMC-TD002, for the specifications and

additional products referenced in this section:

• Include unobstructed access to the linear thrusters shipping and handling setscrew in

your application design.

• This product can be operated in compliance with the relevant safety regulations, only if

the maximum loading limits are observed.

• If you are mounting your linear thruster in a vertical or sloping position, include safety

measures that will control the work load, should the power fail.

• Corrosive environments reduce the service life of linear thrusters.

• Factory-manufactured feedback and power cables are available in standard cable lengths.

They provide environmental sealing and shield termination. Contact your

Allen-Bradley® sales office or refer to the Kinetix Motion Accessories Specifications,

publication GMC-TD004, for additional information.

General safety standards and requirements include, but are not limited to, the following:

• UL 1740 Safety of Robots and Robotic Equipment

• ANSI/RIA R15.06, Industrial Robots and Robot Systems Safety Requirements -

Teaching Multiple Robots

• ANSI/NFPA 79, Electrical Standard for Industrial Machinery

• CSA/CAN Z434, Industrial Robots and Robot Systems- General Safety Requirements

• EN60204-1, Safety of Machinery. Electrical Equipment of Machines

ATTENTION: Uncontrolled moving masses can cause injury or damage to property.

If there is a power failure, the working mass will drop down.

Check whether additional external safety measures are required to prevent damage in

the event of a power failure.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 79 80

Sin comentarios

Rockwell-automation LDAT Integrated Linear Thrusters Manual de usuario Pagina 10