Rockwell-automation LDAT Integrated Linear Thrusters Manual de usuario descargar pdf (Pagina 14)

14 LDAT-Series Integrated Linear Thrusters

Rockwell Automation Publication LDAT-IN001A-EN-P - August 2012

If installing a counterbalance kit, install counter balance end bracket between slider end

cap and slider-end accessory. Complete counter balance kit installation by following

steps in Install Counterbalance Kit

on page 14.

Install Counterbalance Kit

Follow these steps to install the counter balance kit.

Unless otherwise noted, torque specifications have a ±20% tolerance.

1. Remove M8 set screws from stator body.

2. Install stator bracket with two M8 x 1.25 x 16 socket head cap screws (SHCS).

Torque screw to 19.2 N•m (14.2 lb•ft).

3. Screw one 3/8 in. hex nut onto a spring anchor.

4. Install hex nut and spring anchor assemble in one of the three threaded mount locations.

Torque nut to 33.9 N•m (25.0 lb•ft).

5. Remove three screws that secure the slider-end cap and discard.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Sin comentarios

Rockwell-automation LDAT Integrated Linear Thrusters Manual de usuario Pagina 14