Rockwell-automation LDAT Integrated Linear Thrusters Manual de usuario Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
LDAT-Series Integrated Linear Thrusters 61
Rockwell Automation Publication LDAT-IN001A-EN-P - August 2012
Disassemble the Linear Truster
Follow this procedure to disassemble your linear thruster.
1. If your linear thruster has the strip cover, option follow Remove Strip Cover procedure
on page 67.
2. Loosen the shipping and handling set screw.
3. Remove the coil screws.
4. Remove the bearing screws.
There are four screws per bearing.
TIP
Use non-magnetic tools and hardware made of beryllium copper, 300 series stainless steel. If
these tools are not available, proceed carefully as the magnet track attracts magnetic and
ferrous items.
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 79 80

Comentarios a estos manuales

Sin comentarios