Rockwell-automation LDAT Integrated Linear Thrusters Manual de usuario descargar pdf (Pagina 15)

LDAT-Series Integrated Linear Thrusters 15

Rockwell Automation Publication LDAT-IN001A-EN-P - August 2012

6. Install the counter balance and slider-end cap the screws that came with the kit.

7. Torque to values shown in table.

8. Screw one 3/8 in. hex nut onto a spring anchor.

9. Install hex nut and spring anchor assemble in the counter balance bracket.

Torque nut to 33.9 N•m (25.0 lb•ft).

Attach your counter balance spring between the two spring anchor pins.

LDAT Frame Size S1 S1 Torque N•m (lb•in) S2 S2 Torque N•m (lb•in)

30 M8 x1.25 x 40 13.5 (10.0) M6 x1.0 x 30 9.0 (6.6)

M10 x1.5 x 50 33.9 (25.0)

M10 x1.5 x 30 33.9 (25.0)

100 M12 x1.75 x 60 54.8 (40.4)

150 M14 x2.05 x 60 84.7 (62.5)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 79 80

Sin comentarios

Rockwell-automation LDAT Integrated Linear Thrusters Manual de usuario Pagina 15