Rockwell-automation LDAT Integrated Linear Thrusters Manual de usuario descargar pdf (Pagina 60)

60 LDAT-Series Integrated Linear Thrusters

Rockwell Automation Publication LDAT-IN001A-EN-P - August 2012

Install Replacement Parts

Be sure to have all replacement parts and tools available before starting this procedure. Read and

understand procedures before attempting repair any part of the linear thruster.

You will require a set of hex wrenches to preform most tasks. You will require a T10 Torx driver

to replace the encoder.

Replace the Bearing

1. Disassemble the linear thruster by following procedure on page 60.

2. Remove the bearing by following procedure on page 65

3. Install the bearing by following procedure on page 65

4. Assemble the linear thruster by following procedure on page 63

Replace the Encoder

1. Remove the encoder by following procedure on page 68.

2. Install the encoder by following procedure on page 68

3. Check the encoder by following procedure on page 69

4. Run the Hookup test by following procedure on page 70

Replace the Encoder Scale

1. Disassemble the linear thruster by following procedure on page 60.

2. Remove the encoder scale by following procedure on page 70

3. Mount the encoder scale by following procedure on page 68

4. Assemble the linear thruster by following procedure on page 63

5. Check the encoder by following procedure on page 69

6. Do the Hookup test by following procedure on page 70

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 79 80

Sin comentarios

Rockwell-automation LDAT Integrated Linear Thrusters Manual de usuario Pagina 60