Rockwell-automation 22-COMM-E EtherNet/IP Adapter Manual de usuario descargar pdf (Pagina 14)

1-2 Getting Started

The EtherNet/IP adapter features the following:

• The adapter is mounted in the PowerFlex 40 drive. It receives the

required power from the drive.

• A switch lets you select between Single or Multi-Drive mode of

operation. In Single mode (default), the adapter represents a single

drive on one node. In Multi-Drive mode, the adapter represents up to 5

drives on one node.

• A switch lets you enable or disable (default) the adapter web pages.

• A number of configuration tools can be used to configure the adapter

and connected drive. The tools include an external PowerFlex 4-Class

HIM (22-HIM-*), network software such as RSNetWorx for

EtherNet/IP, or drive-configuration software such as DriveExplorer

(version 3.01 or higher) or DriveExecutive (version 3.01 or higher). In

addition, you can use a BOOTP server to configure the network

features on the adapter (for example, the IP address).

• Status indicators report the status of the drive communications,

adapter, and network.

• I/O, including Logic Command/Reference, may be configured for

your application using a parameter.

• Explicit Messages are supported.

• User-defined fault actions determine how the adapter and PowerFlex

drive respond to communication disruptions on the network and

controllers in idle mode.

• Each adapter has Web pages that display information about the

adapter, the connected drive, and other DSI devices connected to the

drive. The adapter can also be configured to send e-mail messages to

desired addresses when selected drive faults occur and/or are cleared,

and/or when the adapter takes a communication or idle fault action.

Features

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 165 166

Sin comentarios

Rockwell-automation 22-COMM-E EtherNet/IP Adapter Manual de usuario Pagina 14