Rockwell-automation 22-COMM-E EtherNet/IP Adapter Manual de usuario descargar pdf (Pagina 40)

4-4 Configuring the Scanner or Bridge

To transmit data between the scanner or bridge and the adapter, you must

add the 22-COMM-E adapter as a child device of the scanner or bridge.

1. In the Control Organizer pane, right-click on the scanner or bridge

and select New Module (Figure 4.6

). In our example, we right-click

on the 1756-ENBT/A bridge.

Figure 4.6 Right-Clicking on the Scanner

The Select Module Type dialog box (Figure 4.7) appears.

Figure 4.7 Select Module Type Dialog Box

2. Select ETHERNET-MODULE to configure a 22-COMM-E

(Figure 4.7), and then click OK.

Adding the Adapter and Drive to the I/O Configuration

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 165 166

Sin comentarios

Rockwell-automation 22-COMM-E EtherNet/IP Adapter Manual de usuario Pagina 40