Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Manual de usuario descargar pdf (Pagina 12)

12 Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013

Chapter 1 Getting Started

Features

The features of the adapter include the following:

• Typical mounting in a PowerFlex 7-Class drive or SMC soft starter.

• Captive screws to secure and ground the adapter to the drive.

• Compatibility with various configuration tools to configure the adapter

and connected host drive, including the following tools:

– PowerFlex HIM (Human Interface Module) on the drive or SMC, if

available

– Connected Components Workbench software, version 1.02 or later

– DriveExplorer software, version 2.01 or later

– DriveExecutive software, version 3.01 or later

– RSLogix5000 version16 and later with Drives Add-on Profile version

4.05 and later

Additionally, you can use a BOOTP/DHCP server to configure the

network address for the adapter.

• Status indicators that report the status of the drive communications, the

adapter, and network. They are visible when the drive cover is open or closed.

• Parameter-configured I/O (Logic Command/Reference and up to four

pairs of Datalinks) to accommodate application requirements.

• Explicit Messaging support.

• Master-Slave or Peer-to-Peer hierarchy that can be configured to transmit

data to and from either a controller or another PowerFlex drive or SMC on

the network.

• User-defined fault actions to determine how the adapter and connected

PowerFlex drive respond to the following:

– I/O messaging communication disruptions (Comm Flt Action)

– Controllers in idle mode (Idle Flt Action)

• Web pages, viewed by using a web browser, that show information about the

adapter, its connected host drive, and DPI devices connected to the drive.

• Configurable e-mail messaging to desired addresses when selected drive

faults occur and/or are cleared, and/or when the adapter takes a

communication or idle fault action.

• Access to any PowerFlex drive or SMC and its connected peripherals on

the network to which the adapter is connected.

• Device Level Ring (DLR) or Star Topology support with Quality of

Service (QoS) support.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 237 238

Sin comentarios

Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Manual de usuario Pagina 12