Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Manual de usuario descargar pdf (Pagina 60)

60 Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013

Chapter 4 Configuring the I/O

the treeview under the I/O Configuration folder and drive profile should

be gone.

6. The Module Properties Drive Tab screen re-appears.

You can view the drive’s Parameter List, Diagnostic Items List, and lists

for any connected peripheral, including the 20-COMM-ER. While

connected to the drive, you can dynamically change values of

parameters. Diagnostic items and diagram views can be used for

troubleshooting. Table 24 on page 147

provides diagnostic items for

troubleshooting the adapter.

7. Click OK when finished to close the Module Properties screen for the

drive.

Using the RSLogix 5000 Classic Profile, Versions 13.00…15.00

When compared to using the RSLogix 5000 Generic Profile (all versions), the

RSLogix 5000 Classic Profile provides these advantages:

• Profiles for specific drives (Figure 10

) that provide descriptive controller

tags for basic control I/O words (Logic Command/Status and Reference/

Feedback). The controller tags for Datalinks, however, have non-

descriptive UserDefinedData[n] names.

• Improved I/O configuration—no I/O assembly configuration required.

Basic control I/O is defined, but Datalinks still need to be configured/

mapped.

TIP

If the yellow warning symbol for your drive remains displayed, first try

power cycling the drive. Otherwise, double-click the drive under the I/O tree and

click the Connection tab to find the cause of the problem.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 237 238

Sin comentarios

Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Manual de usuario Pagina 60