Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Manual de usuario descargar pdf (Pagina 52)

52 Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013

Chapter 4 Configuring the I/O

1. In the treeview, right-click on the bridge and choose New Module… to

display the Select Module screen.

In our example, we right-click on the 1756-ENBT/A bridge. Expand the

Drives group to display all of the available drives with their

communication adapters.

2. From the list, select the drive and its connected adapter.

For this example, we selected ‘PowerFlex 70 EC-E’.

3. Click OK.

The drive’s New Module screen appears.

4. On the General tab, edit the following data about the drive/adapter.

5. On the New Module screen in the Module Definition section, click

Change… to launch the Module Definition screen and begin the drive/

adapter configuration process.

In this example, Datalinks are used to do the following.

TIP

If the PowerFlex drive is not shown, go to www.ab.com/support/abdrives/

webupdate and download the latest RSLogix 5000 device Add-on Profile.

Box Setting

Name A name to identify the drive.

Description Optional – description of the drive/adapter.

IP Address The IP address of the adapter.

Read… Write to…

Output Current (Parameter 3) Accel Time 1 (Parameter 140)

DC Bus Voltage (Parameter 12) Decel Time 1 (Parameter 142)

Fault 1 Code (Parameter 243) High Resolution Reference (Parameter 308)

TIP

To get the latest RSLogix 5000 device Add-on Profile, go to

www.ab.com/support/abdrives/webupdate

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 237 238

Sin comentarios

Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Manual de usuario Pagina 52