Rockwell-automation 2098-UWCPRG Ultraware Software User Manual Manual de usuario descargar pdf (Pagina 125)

Rockwell Automation Publication 2098-UM001G-EN-P - February 2011 127

Configuring the Ultra3000 Drive Chapter 3

The Faults window has these parameters, status, and commands associated with

it:

Parameter Description

User Current Fault The level, in amperes, that generates a fault when exceeded by the

average current level. The drive automatically protects itself and

the motor from average currents that exceed their ratings, and this

protection cannot be disabled. This value is only needed if a lower

average current fault is desired (For example, if another part of a

machine would overheat). It has a range of 0…256A.

Note: Not available for a SERCOS drive.

User Velocity Fault The minimum velocity that causes the User Velocity fault. The drive

automatically protects the motor from exceeding its ratings, and

this protection cannot be disabled. This value is only needed if a

lower velocity fault is desired. (For example, if another part of a

machine could be damaged.)

Note: Not available for a SERCOS drive.

User Velocity Fault Enable Enable or disable User Velocity Fault detection.

• Enabled: turns on User Velocity Fault detection by the drive.

• Disabled: turns off User Velocity Fault detection by the drive.

Note: Not available for a SERCOS drive.

Velocity Error Fault Limit The minimum velocity error that triggers the Velocity Error fault.

Velocity Error Fault Time The minimum time that the velocity error must be greater than the

Velocity Error Fault Limit to cause a Following Error fault. It has a

range of 0…65,535 ms.

Following Error Limit The minimum position error that triggers the Following Error fault.

Note: Not available for a SERCOS drive.

Following Error Time The minimum time during that the position error must be greater

than the Following Error Fault Limit to cause a Following Error fault.

It has a range of 0…65,535 ms.

Note: Not available for a SERCOS drive.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 353 354

Comentarios a estos manuales

Sin comentarios