Rockwell-automation 2098-UWCPRG Ultraware Software User Manual Manual de usuario descargar pdf (Pagina 180)

182 Rockwell Automation Publication 2098-UM001G-EN-P - February 2011

Chapter 4 Configuring the Ultra5000 Drive

Understanding the Digital

Outputs Window

The Properties window for the Digital Outputs branch looks like this

Use the Digital Outputs window to name, monitor, and toggle the status of the

eight digital outputs.

You can edit parameters for both an online and an offline Digital Outputs

branch. However, you can monitor status, and execute direct commands

(executed through the Ultraware interface, rather than through a compiled,

loaded and executed program) only for a Digital Outputs branch that is the child

of an online drive.

The following parameters can be entered and edited in the Digital Outputs

window.

The following display is the default status for a Digital Outputs branch of an

online drive.

Parameter Description

Output 1 – 8 Name Type in the name of the output. The default value is a number

from 1 to 8.

Output 1 – 8 Polarities The desired polarity for each output.

Active High: The output is turned ON by applying a positive

voltage to the output.

Active Low: The output is turned ON by setting the voltage at

the output to zero.

Status Description

Output 1 – 8 State The current state, or condition, of each digital output is depicted

by a light bulb icon, as follows:

• ON: A bright light bulb

• OFF: A darkened light bulb.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 353 354

Sin comentarios

Rockwell-automation 2098-UWCPRG Ultraware Software User Manual Manual de usuario Pagina 180