Rockwell-automation IASIMP Computer Numerical Control (CNC) Machining Manual de usuario descargar pdf (Pagina 111)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 111

GuardLogix Configuration Chapter 4

Set Visible Rows for Equipment Status Faceplate

If you plan to use the equipment status faceplate with your HMI application, follow these steps to set the

Inp_NumRowsVis tag value within the faceplate Add-On Instruction of the device you intend to place in the

first row.

1. Determine how many of the nine available rows you will use in the Equipment Status faceplate.

Refer to Chapter 5 beginning on page 147 for an overview of the faceplate so you can determine how many

status rows you require and what device you would like to place in the first row.

For the CNC Work Cell application example, four devices are included in the equipment status faceplate,

with the first one being the Drill CNC, placed in the first row:

• Drill CNC

• Machining CNC

• Gantry X Axis Drive

• Gantry Y Axis Drive

2. Open the R04_Monitor routine for the device in the first row of the equipment status faceplate and

navigate to the device specific faceplate Add-On Instruction.

For the CNC Work Cell application example, the R04_Monitor routine in the P04_Drill_CNC program

was opened.

3. Click (View Configuration dialog box) to open the Add-On Instruction properties.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 277 278

Sin comentarios

Rockwell-automation IASIMP Computer Numerical Control (CNC) Machining Manual de usuario Pagina 111