Rockwell-automation IASIMP Computer Numerical Control (CNC) Machining Manual de usuario descargar pdf (Pagina 67)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 67

FANUC CNC Configuration Chapter 3

6. Press either the + softkey or the right arrow

function key to advance to the chapter

selection for EtherNet/IP scanner settings,

EIP S SET.

7. Press the (OPRT) softkey to display available

operations for the EtherNet/IP scanner

settings.

8. Press either the + softkey or the right arrow

function key to advance to the operation

selection for restore.

9. Press the RESTORE softkey to display

available operations for the EtherNet/IP

scanner restore operations.

10. Press the EXECUTE softkey to copy the

parameters from the external USB device to the

CNC parameter memory.

11. Power down the CNC to accept the changes to

the EtherNet/IP settings.

12. Power up the CNC, then repeat step 2

...step 11

for the Ethernet adaptor settings (at step 6

select EIP A SET).

The Ethernet board is now configured for the

connection to the supervisory PLC that uses

the EtherNet/IP protocol.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 277 278

Sin comentarios

Rockwell-automation IASIMP Computer Numerical Control (CNC) Machining Manual de usuario Pagina 67