Rockwell-automation IASIMP Computer Numerical Control (CNC) Machining Manual de usuario descargar pdf (Pagina 261)

Rockwell Automation Publication IASIMP-QS034A-EN-P - October 2012 261

Appendix

Logix Communication and Controller Configuration

In this appendix, you configure your personal computer and controller communication, configure your

controller, and create a new project by using RSLogix 5000 software.

Configure Personal Computer Communication Properties

In this example, you set and verify the IP address of the personal computer running your program.

Set the IP Address

1. On your desktop, right-click My Network

Places and choose Properties.

2. Double-click Local Area Connection.

3. On the General tab, select Properties.

4. Verify Internet Protocol (TCP/IP) is

checked and selected.

5. Click Properties.

6. Select Use the following IP address.

7. Enter the IP address and Subnet mask as

shown, or enter your address.

8. Click OK.

9. Close all network windows.

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 277 278

Sin comentarios

Rockwell-automation IASIMP Computer Numerical Control (CNC) Machining Manual de usuario Pagina 261