Rockwell-automation MPMA Integrated Multi-Axis Linear Stages Manual de usuario descargar pdf (Pagina 35)

Rockwell Automation Publication MPMA-UM001B-EN-P - November 2010 35

Mounting and Connecting the MP-Series Integrated Multi-axis Linear Stage Chapter 4

Store Packaging Material

Keep the crate and packing materials in case the multi-axis stage needs to be

returned for warranty service or stored for an extended period of time.

1. Tape screws and clamp hardware to the plywood board brace.

2. Put the end caps and braces in their original positions and place all packing

material inside the crate.

Multi-axis Stage Storage

The multi-axis stage storage area should be clean, dry, vibration free, and have a

relatively constant temperature. Refer to Environmental Specifications for

Multi-

axis Stages on page 101 for more detailed information.

Mount the Multi-axis Stage

Follow these steps to install a multi-axis stage on its mounting surface using the

supplied tee nut bars. Refer to Specifications and Dimensions

beginning on

page 81

for detailed mounting dimensions and the number of fasteners required.

Fastener Order Illustration User Supplies

(4)

Recommended For

Torque

N•m (lbf•in)

Through Bolt

(1)

– M5 x 1.0 x 16 mm min Uncovered stages 3.4 (30)

Toe clamps MPAS-TOE M6 x 1.0 x 16 mm min Covered stages 5.5 (48)

Tee nuts

(2)

MPAPS-x-TNUT

(3)

M6 x1.0 Securing a stage from beneath

the mounting surface.

Tee Nut 5.5 (48)

Square Nut 2.3 (30)

(1) Through bolt mounting is not an option for catalog number MPAS-x6xxxx-xLMxxx (150 mm) stages.

(2) The tee nut mount for a catalog number MPAS-x8xxxx-xxxxx (200 mm) stage is a square nut in a tee slot.

(3) Where x is the frame size of a stage, 6 = MPAS-x6xxxx-xxxxx (150 mm), 8 = MPAS-x8xxxx-xxxxx (200 mm), 9 = CHPS-x9xxxx-xxxxx (250 mm).

(4) You supply the bolts.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 135 136

Sin comentarios

Rockwell-automation MPMA Integrated Multi-Axis Linear Stages Manual de usuario Pagina 35