Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manual de usuario descargar pdf (Pagina 290)

290 Rockwell Automation Publication 280E-UM001B-EN-P – July 2012

Appendix B CIP Information

Parameter Object

CLASS CODE 0x000F

The following class attributes will be supported for the Parameter Object.

The number of instances of the parameter object will depend upon the type of

Control Module that the EtherNet/IP board is connected to.

The following instance attributes will be implemented for all parameter

attributes.

Attribute ID Access Rule Name Data Type Value

1 Get Revision UINT —

2 Get Max Instance UINT —

8 Get Parameter Class Descriptor WORD —

Attribute ID Access Rule Name Data Type Value

1 Get/Set Value Specified in Descriptor —

2 Get Link Path Size USINT —

3Get Link Path

Array of:

BYTE

EPATH

—

4 Get Descriptor WORD —

5Get Data TypeEPATH —

6 Get Data Size USINT —

7 Get Parameter Name String SHORT_STRING —

8 Get Units String SHORT_STRING —

9 Get Help String SHORT_STRING —

10 Get Minimum Value Specified in Descriptor —

11 Get Maximum Value Specified in Descriptor —

12 Get Default Value Specified in Descriptor —

13 Get Scaling Multiplier UINT —

14 Get Scaling Devisor UINT —

15 Get Scaling Base UINT —

16 Get Scaling Offset INT —

17 Get Multiplier Link UINT —

18 Get Divisor Link UINT —

19 Get Base Link UINT —

20 Get Offset Link UINT —

21 Get Decimal Precision USINT —

1 2 ... 285 286 287 288 289 290 291 292 293 294 295 ... 347 348

Sin comentarios

Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manual de usuario Pagina 290