Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manual de usuario descargar pdf (Pagina 298)

298 Rockwell Automation Publication 280E-UM001B-EN-P – July 2012

Appendix B CIP Information

The following class attributes are supported:

Four instances of the DPI Fault Object are supported. The have the following

instance attributes:

The following services are supported:

Attribute ID Access Rule Name Data Type Value

1 Get Class Revision UINT 1

2 Get Number of Instances UINT 4

3 Get Fault Cmd Write USINT 0 = NOP, 1 = Clear Fault, 2 = Clear Flt Queue

4 Get Fault Instance Read UINT

The instance of the Fault Queue Entry containing

information about the Fault that tripped the Device.

6 Get Number of Recorded Faults UINT The number of Faults recorded in the Fault Queue.

Attribute ID Access Rule Name Data Type Value

0 Get Full/All Info Struct of: —

— — Fault Code UINT See table below.

— — Fault Source Struct of: —

— — DPI Port Number USINT 0

— — Device Object Instance USINT 0x2c

— — B Fault Text BYTE[16] See table below.

— — Fault Time Stamp Struct of: —

— — Timer Value ULDINT —

— — Timer Description WORD —

— — Help Object Instance USINT —

—— Fault Data —

1GetBasic Info Struct of: —

— — Fault Code UINT See table below.

— — Fault Source Struct of: —

— — DPI Port Number USINT 0

— — Device Object Instance USINT 0x2C

— — Fault Time Stamp Struct of: —

— — Timer Value ULINT —

— — Timer Description WORD —

3 Get Help Text STRING See table below.

Service Code

Implemented for:

Service NameClass Instance

0x0E Yes Yes Get_Attribute_Single

0x10 Yes No Set_Attribute_Single

1 2 ... 293 294 295 296 297 298 299 300 301 302 303 ... 347 348

Sin comentarios

Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manual de usuario Pagina 298