Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manual de usuario descargar pdf (Pagina 293)

Rockwell Automation Publication 280E-UM001B-EN-P – July 2012 293

CIP Information Appendix B

Instance 2 contains the following instance attributes.

The following common services are implemented for the Discrete Output Group

Object.

Control Supervisor Object

CLASS CODE 0x0029

No class attributes are supported.

A single instance (Instance 1) of the Control Supervisor Object is supported and

contains the following instance attributes.

Attribute ID Access Rule Name Data Type Value

3 Get Number of Instances USINT 4

4 Get Binding Array of UINT 5, 6, 7, 8

7 Get/Set Fault Action BOOL 0 = Fault Value Attribute, 1 = Hold Last State

8 Get/Set Fault Value BOOL 0 = OFF, 1 = On

9 Get/Set Idle Action BOOL 0 = Idle Value Attribute, 1 = Hold Last State

10 Get/Set Idle Value BOOL 0 = OFF, 1 = On

113 Get/Set Pr Fault Action BOOL 0 = Pr Fault Value Attribute, 1 = Ignore

114 Get/Set Pr Fault Value BOOL 0 = OFF, 1 = On

Service Code

Implemented for:

Service NameClass Instance

0x0E No Yes Get_Attribute_Single

0x10 No Yes Set_Attribute_Single

Attribute ID Access Rule Name Data Type Value

3 Get/Set Run 1 BOOL

These Run outputs also map to DOP

Instances 1 and 2

4 ➊ Get/Set Run 2 BOOL —

7 Get Running 1 BOOL —

8 ➊ Get Running 2 BOOL —

9 Get Ready BOOL —

10 Get Tripped BOOL —

12 Get/Set Fault Reset BOOL 0->1 = Trip Reset

100 Get/Set Keypad Mode BOOL 0 = Maintained, 1 = Momentary

101 Get/Set Keypad Disable BOOL 0 = Not Disabled, 1= Disabled

1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 347 348

Sin comentarios

Rockwell-automation 284E ArmorStart with EtherNet/IP - User Manual Manual de usuario Pagina 293