Rockwell-automation 1305 AC Drive, Firmware 1.01-3.00 User Manual Manual de usuario descargar pdf (Pagina 36)

Chapter 2 –Installation/Wiring

2-20

ADAPTERS

An adapter is any device connected to the drive’s serial port.

Typical devices include:

D Human Interface Modules

D Communication Modules

D Future adapter devices

IMPORTANT:A maximum of five adapters can communicate

to the drive.

The total current draw of all adapters should not exceed

250mA. Refer to the data sheet or nameplate of each adapter

for the amount of current needed for the adapter to operate.

The Adapter address is determined as follows:

D Port 1 equals Adapter 1.

D Port 2 equals Adapter 2. However, if a splitter is used to

expand the number of Adapters to 3, 4 or 5 the splitter will

be marked with the appropriate Adapter numbers.

Adapter Mounting Distance

The maximum mounting distance between any two adapters

connected to the drive is 10 meters. Refer to Figure 2.9.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 161 162

Sin comentarios

Rockwell-automation 1305 AC Drive, Firmware 1.01-3.00 User Manual Manual de usuario Pagina 36