Rockwell-automation 1305 AC Drive, Firmware 1.01-3.00 User Manual Manual de usuario descargar pdf (Pagina 52)

Chapter 3 –Human Interface Module

3-14

CONTROL STATUS MODE

ACTION

DESCRIPTION

HIM DISPLAY

SEL

❏ 1. The Control Status mode is only available with HIM software versions

3.00 and above.

This mode allows the drive logic mask to be disabled, thus preventing a

Serial Fault when the HIM is removed with drive power applied.

a. From the Status Display, press Enter (or any key). “Choose Mode” will

be shown.

b. Press the Increment (or Decrement) key until “Control Status” is

displayed. Press Enter.

c. Select “Control Logic” using the Increment/Decrement keys. Press

Enter.

d. Press the SEL key, then use the Increment (or Decrement) key to select

“Disabled” (or “Enable”).

e. Press Enter. The logic mask is now disabled (or enabled).

Choose Mode

Display

Choose Mode

Control Status

Control Logic

Disabled

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 161 162

Sin comentarios

Rockwell-automation 1305 AC Drive, Firmware 1.01-3.00 User Manual Manual de usuario Pagina 52