Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Manual de usuario Pagina 119

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 194
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 118
Module Parameters
B-1
APPENDIX B
Module Parameters
The following information is provided for each EtherNet/IP module
parameter along with its description:
About Parameter Numbers
The parameters in the EtherNet/IP module are numbered
sequentially. However, depending on the configuration tool used,
they may have different numbers.
Parameter Number: Unique number assigned to each
parameter.
Parameter Name: Unique name assigned to each
parameter.
Range: Predefined parameter limits or
selections.
Default: Factory default setting.
Type: Read Only or Read/Write
Reset Required: Module must be reset before parameter
value is recognized.
Configuration Tool Numbering Schemes
VS Utilities
•OIM
The module parameters begin with
parameter 1. For example, parameter 01
(DPI Port) is parameter 1 as indicated by
the manual.
Explicit Messaging Refer to chapter 7, Using Explicit
Messaging, and Appendix C, EtherNet/IP
Objects, for details.
Vista de pagina 118
1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 193 194

Comentarios a estos manuales

Sin comentarios