Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Manual de usuario descargar pdf (Pagina 54)

5-6

EtherNet/IP Communications Module

Step 3. Edit the fields listed in table 5.2.

Step 4. Under Connection Parameters, edit the fields listed in

table 5.3.

Figure 5.8 – Module Properties Dialog Box - Page 1

SP600

Table 5.2 – Edit Module Properties

Field Enter This Information

Name A name to identify the module and drive.

Comm. Format Data - INT.

This setting formats the data in 16-bit words.

IP Address The IP address of the module.

Table 5.3 – Edit Connection Parameters

Field

Assembly

Instance

Column Size Column

Input 1 (This value is

required.)

The value will vary based on your

application (setting of parameters

23 (I/O Config) and 36 (M-S

Output) and the size (16- or 32-

bit) of the Reference/Feedback

and Datalinks in the drive. Refer to

tables 5.4 and 5.5.

Output 2 (This value is

required.)

The value will vary based on your

application (setting of Parameters

23 - [I/O Config] and 35 - [M-S

Input]) and the size (16- or 32-bit)

of the Reference/Feedback and

Datalinks in the drive. Refer to

tables 5.4 and 5.5.

Configuration 6 (This value is

required.)

0 (This value is required.)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 193 194

Sin comentarios

Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Manual de usuario Pagina 54